Shenzhen Haishuo Technology Co., Ltd - Product - FOWAY 4channel video optical transceivers
2

Home  -  Product  -  FOWAY 4channel video optical transceivers

3

FOWAY 4channel video optical transceivers

It is to transmit 2 channel bidirectional digital video broadcasting, 1~2 channel bidirectional high-fidelity audio, 1~4 channel bidirectional asynchronous data,1 channel 10/100M adapt Ethernet data to one fiber efficiently.

Name: 4-channel digital video-audio / data/Ethernet video optical transceivers

Type:  FOWAY8004T/R series
Function: 4 channel bidirectional digital video broadcasting, 1~2 channel bidirectional high-fidelity audio, 1~4 channel bidirectional asynchronous data, 1 channel 10/100M adapt Ethernet data to one fiber efficiently.

Product information:
It is to transmit 4 channel bidirectional digital video broadcasting, 1~2 channel bidirectional high-fidelity audio, 1~4 channel bidirectional asynchronous data,1 channel 10/100M adapt Ethernet data to one fiber efficiently. With complete digital and technology, FOWAY8004T/R series support any high resolution dynamic or stationary picture high-fidelity transmits. It also can be anti-disturbance against several signals, environment, and work stably .It is widely used in security monitoring and control, high way, electronic police, automation, intelligent residential districts and so on.
It can work shortly after it is installed. You could select any data interface by set. It is connected easily and it can indicate power supply, link, and audio, also adjust video. There are two ways to install: desktop and rack.

Feature:  
Technical design, the whole surface by decoration.
Electrical circuit is designed by hardware scheme (except chip), and production is not effected by purchasing.
Full digital fiber transmit platform.
No need to adjust when opened.
Based on self copyright IC.
No disturbance by analog in adjusting channel, picture and range.
4 steps filtering
Full digital, broadcast transmit efficiently
High speed 10/100M Ethernet channel.
Full speed asynchronous data channel
Elastic configuration on the same platform.
Power supply, link, video by dynamic indication.
Self-adapt in PALNTSCSECAM.
ASIC design
Farthest transmit distance: 100KM
Power supply: 220v,-48v, +24, +12v, +5(optional)
The two poles of Direct power supply can be exchanged.
The interface is installed by SNMP.
Three installations: wall method, rack in 19inches 1U, or plug in-card.
Support OEM.
 
Applied field
  
Intelligent transportation system;
high speed way video monitoring and control system;
toll monitoring and control system;
close circuit TV industry monitoring and control;
TV program switching channel transmit;
high-fidelity video conference system;
security monitoring and control system.

 
Technical parameter:  
Video interface 4 channel
   
input/output impedance: BNC 75Ω unbalance interface
   
input/output voltage: peak 1 Vpp, max 1.5 Vpp
   
Signal: PAL/NTSC/SECAM
   
Video bandwidth: 8MHZ
   
Video number wide: 8/10/12 bit
    ◇ Differential gain: <1%
    ◇ Differential phase: <0.6°
    ◇ Slope: <0.5%
    ◇ luminance delay inequality: 10ns
    ◇ luminance gain gap: ±10%
    ◇ Weighted noise ratio: 66db

Data interface (support 1~4 channel asynchronous data RS-232/485/422)
    ◇ Physical interface: industry standard terminal lead
    ◇ Work way: full duplex/half duplex
    ◇ Interface type: RS-232/485/422
Manchester
    ◇ RS232 rate
0-115.2Kbps
    ◇ RS-422/485 rate: 0-115.2Kbps
    ◇ RS-422/485 transmit distance: 0-1200m
    ◇ RS-422/485 agreement support RS-485/422 agreement
    ◇ Error rate: <10-9
    ◇ Fiber interface
    ◇ Physical interface: FC/PC
ST/PC
    ◇ Fiber type: single/multi module
    ◇ Transmit distance: multi module with 0-2km
single module with 0-25km0-60km0-100km

Audio interfacesupport 1~4 channel optional and bidirectional audio
    ◇ audio input/output: impedance 600Ω balance/unbalance interface
industry standard terminal lead.
    ◇ Audio input/output level: 2Vpp
    ◇ frequency response: 10HZ-20KHZ
    ◇ audio number width: 24 bit
    ◇ Weighted noise ratio: 80db
    ◇ Total Harmonic Distortion: 0.1%

Ethernet interface
    ◇ Physical interface: shielding RJ-45
    ◇ support IEEE 802.3/802.3u/802.1q VLAN
    ◇ work way: IEEE 802.3x full duplex and Back-Pressure half duplex flow control.


Work environment
    ◇ Work temperature: -30℃~+75℃
    ◇ storage temperature
-45℃~+85℃
    ◇ humidity : 0
95% without condensation
    ◇ input voltage :220V
-48V+24V+12V+5V optional
    ◇ power ≤5W (single terminal)
    ◇ size : 482.6X 260X 25.4mm